Valiant VC 1966

Click on image to enlarge

Car as it first arrived

 

Rear shot Interior
Panels returned from the alkaline dippers Boot floor badly rusted

 

Lower door skin welded in place and file finished
Fabricated small patch on inside of bonnet, besides that the bonnet was in good condition Fabricated inner rear wheel arch panel

 

Fabricated lower door frame, against rusted frame
The rusted out panel along side the fabricated panel which goes on the inside of the right rear quarter panel section Fabricated right rear quarter panel section Right rear quarter panel section
Fabricated right front guard lower section, about to weld in place Lower sill end section

 

Rusted lower door frame section with the fabricated panel
Quarter panel was in terrible condition Lower door skin ready to weld in place N/S front guard and the extent of the rust on the guard frame and the actual guard skin
Clean and primered inside sill end section N/S front guard, trial fitting in place before welding the outer lower front guard panel in place Fabricated sill end section
Left rear quarter panel with the fabricated quater panel Primering underbody after the car returned from the sandblasters to have the underbody engine bay area and boot area blasted Painted suspension parts
Car on rotisserie,rubbed and sealed underbody,ready for paint.This car doesnt have much stoneguard from original only on wheel arches Fabricated spare wheel floor panel oxy welded in place Fabricated panel along side rusted out panel,goes on the inner rear wheel arch

 

Fabrciated left rear lower quarter panel in place oxy welded in and awaiting to be file finished

 

Underbody on the rotisserie painted Inside compartment painted

 

Just out of the spraybooth Body painted Painted suspension parts
Engine components painted View of the dash & steering in ready for the rest of the assembly

 

The VC valiant on all 4 wheels

  Home

Copyright @2009 all rights reserved O&S sports car restoration pty ltd | Classic car restoration  :.:  Design FRU